Curtain Wall System
Cladding Facade Systems
FS50-KAPAKLI

  • Facades with remarkable aesthetics with decorative wing alternatives and special profiles suitable for standard and special angles.
  • Maximum air and water discharge performance thanks to the drainage (condensate) channel.
  • Maximum building height: 100 m.
    Longevity thanks to the fact that all wicks are EPDM.
  • Practical and trouble-free detail solutions.
    2.0 and 1.6 mm wall thickness.
    Case width: 50mm.
    Firm bonding with Norton tape.
  • Uninterrupted glass view on building facades with glass holder cassettes.
  • Glass facade integrity with silicone bonding process.
    Possibility of electrostatic painted (RAL) and anodized color application.
  • Manufacturing and assembly convenience.
    Glass combination from 6 to 32 mm.
    Thermal conductivity (Uf) = 6.8 W/m²K.

cotta

  • It does not require maintenance, it is long-lasting.
  • It is an aesthetic, light and economical aluminum facade solution.
  • It provides air and water insulation, reflects heat back.

FS50-Yarı-Kapaklı

  • Optionally, it is possible to emphasize the desired line of the structure by using EPDM roving horizontally or vertically.
  • Visual diversity with decorative cover alternatives.
  • Maximum building height 100 m.
  • Glass combination between 6-24 mm.
  • Longevity thanks to the fact that all wicks are EPDM.
  • Practical and trouble-free detail solutions.

CP50-KOMPOZİT-PANEL-CEPHE-KAPLAMA-SİSTEMİ

  • It does not rust and corrode.
  • Hanger and clip hanger.
  • It provides economy thanks to disassembled manufacturing and assembly.
    It provides the possibility of applying the sub-construction of aluminum composite sheets as aluminum.
  • It is long-lasting and environmentally friendly.

FS65-Sistem-Takviyeli

  • It works like a vertically covered facade system. Being of steel construction, the notching process is applied in horizontal profiles as in the skylight system.
  • The cross-sectional width of the profiles is 65 mm, and the outer cover provides the opportunity to use 55 or 65 mm.
  • Thanks to the condensate channel in the vertical profile, the water is discharged.
  • The cold bridge wedge that may occur with the outer profiles has been eliminated with EPDM wicks.
  • It provides the opportunity to apply horizontally vertically capped and horizontally silicone vertically capped facades.
  • Good at crossing large openings.

FS-50-ECO-SİLİKON-CEPHE

  • Longevity thanks to the fact that all wicks are EPDM.
  • Practical and trouble-free detail solutions.
  • Case width: 50 mm.
  • Uninterrupted glass appearance on building facades with glass holder clips.
  • Glass facade integrity with silicone bonding process.
  • Possibility of applying electrostatic painted (RAL) and anodized color.
  • Convenience of manufacture and assembly.
  • Glass combination from 6 to 32 mm.
  • Maximum air and water discharge performance thanks to the drainage (condensate) channel.
  • Silicone facade view and no cassette in fixed sections.

SB-GUNES-KIRICI

  • Possibility to choose sunshade lamellas in the range of 4-40 cm.

  • Frees the user with different and easy mounting alternatives

FS-50-ECO-SİLİKON-CEPHE

  • Kondens kanallı ve kanalsız olarak uygulanabilir.

    Yatay – düşey kapaklıyabileceği gibi, düşey kapaklı yatay silikon olarak da uygulanabilir.

  • Longevity thanks to the fact that all wicks are EPDM.
  • Special sealing system that is not affected by moisture and evaporation.
  • The ability to be used for many years without being affected by the load and the harshest natural conditions, without changing color and shape.
  • Possibility to easily apply openings at different distances without the need for any equipment consisting of many machines.

  • Glass and polycarbonate sheet can be applied.